Freeport Innnoruuk Cleric (Dismal Priest) Armor

This is one of several armor quests for younglings that was recently added. This one is for evil Freeport human clerics, and is HUM/CLR, Innoruuk, no drop and lore (other than bracer). Please note that while the bracers are not lore, the bracer materials often are, so make your first bracer before you get the parts for a second one

Questgiver is Zhem Xecia in East FP tunnel. The "Dismal Priest" armor is a matte dark rust color of fine plate, and the helm has little horns near the forehead.

You say, 'Hail, Zhem Xecia'

Zhem Xecia says 'What is it maggot? I have only time for new clerics who have chosen to [serve the Dismal Rage]. If you are looking for meaningless banter, than I suggest you find a bar wench.'

You say, 'I serve the Dismal Rage'

Zhem Xecia says 'The clerics of the Dismal Rage must be strong and familiar with battle. There are many beings across Norrath who oppose our deity and our dogma. Take this note to Jerra Renlock and she will aid you in obtaining a suit of armor to protect you from the physical threats of our enemies and the creatures of the wild. Once you have been properly outfitted return to me and will offer you [further instruction].'

Jerra Renlock is outside the building, near neg 314, neg 334. Hand her the note.

Jerra Renlock says 'Ah, so Zhem wants me to assist you with some armor. You will surely need it if you are an associate of the likes of him. This Mail Assembly Kit will be needed for you to construct your armor. The materials required depend on the armor section you plan to construct. Do you plan to construct a [dismal priest helm], a [dismal priest bracer], [dismal priest gauntlets], [dismal priest boots], [dismal priest vambraces], [dismal priest greaves], or a [dismal priest breastplate].'

You say, 'I plan to construct a dismal priest bracer'

Jerra Renlock says 'To assemble a Dismal priest Mail Bracer you will need to obtain a brick of crude iron and smelt it in a [forge] with a Water Flask and this Crude Bracer Mold. Once that is done, combine the Crude Iron Bracer with a Ruined Coyote Pelt and a Sand Scarab Hatchling Sternite in the Mail Assembly Kit.'

Dismal Priest Bracer - No Drop
Slot: Wrist - AC 4
STR +1 MANA +6
Wt: 1.5 - Size: Small
CLR - HUM - Innoruuk

You say, 'I plan to construct dismal priest gauntlets'

Jerra Renlock says 'To assemble Dismal priest Gauntlets you will need to obtain two bricks of crude iron and smelt them in a forge with a Water Flask and this crude Gauntlet Mold. Once that is done combine the Crude Iron Gauntlets with a Ruined Coyote Pelt and two Sand Scarab Hatchling Tarsi in the Mail Assembly Kit.'

Dismal Priest Gauntlets - No Drop
Slot: Hands - AC 5
CHA +1 WIS +2
Wt: 1.8 - Size: Small
CLR - HUM - Innoruuk

You say, 'I plan to construct a dismal priest helm'

Jerra Renlock says 'To assemble a Dismal priest Helm you will need to obtain two bricks of crude iron and smelt them in a [forge] with a Water Flask and this Crude Helm Mold. Once that is done combine the Crude Iron Helm with a Ruined Coyote Pelt and two Sand Scarab Hatchling Eyes in the Mail Assembly Kit.'

Dismal Priest Helm - No Drop
Slot: Head - AC 5
WIS +1 HP + 3 MANA +5
Wt: 0.8 - Size: Small
CLR - HUM - Innoruuk

You say, 'I plan to construct dismal priest vambraces'

Jerra Renlock says 'To assemble Dismal priest Vambraces you will need to obtain two bricks of crude iron and smelt them in a [forge] with a Water Flask and this Crude Vambrace Mold. Once that is done combine the Crude Iron Vambraces with a Low Quality Coyote Pelt and two Large Fire Beetle Patella in the Mail Assembly Kit.'

Dismal Priest Vambraces - No Drop
Slot: Arms - AC 5
STA +1 WIS +2
Wt: 1.8 - Size: Small
CLR - HUM - Innoruuk

You say, 'I plan to construct dismal priest breastplate'

Jerra Renlock says 'To assemble a Dismal priest Breastplate you will need to obtain four bricks of crude iron and smelt them in a forge with a Water Flask and this Crude Breastplate Mold. Once that is done combine the Crude Iron Breastplate with a Coyote Pelt, a Giant Fire Beetle Carapace, and two Giant Fire Beetle Tergites in the Mail Assembly Kit.'

Dismal Priest Breastplate
LORE ITEM NO DROP
AC: +12 Str: +1 Wis: +1 HP: +5
Weight: 4.5
Classes: Cleric
Races: Human
Deity: Innoruuk

You say, 'I plan to construct dismal priest greaves'

Jerra Renlock says 'To assemble Dismal priest Greaves you will need to obtain two bricks of crude iron and smelt them in a [forge] with a Water Flask and this Crude Greaves Mold. Once that is done combine the Crude Iron Greaves with two Low Quality Coyote Pelts and two Large Fire Beetle Sternites in the Mail Assembly Kit.'

Dismal Priest Greaves
LORE ITEM
AC: +6 Str: +1 Wis: +1 Cha: +1
Weight: 4.4

You say, 'I plan to construct dismal priest boots'

Jerra Renlock says 'To assemble Dismal priest Mail Boots you will need to obtain two bricks of crude iron and smelt them in a [forge] with a Water Flask and this crude Boot Mold. Once that is done combine the Crude Iron Boots with two Ruined Coyote Pelts, and two Large Fire Beetle Tarsi in the Mail Assembly Kit.'

Dismal Priest Boots - No Drop
Slot: Feet - AC 5
STR +1 WIS +1
Wt: 3.0 - Size: Small
CLR - HUM - Innoruuk

You say, 'what further instruction'

Zhem Xecia says 'So you think you are ready to face the enemies of the Dismal Rage? Be careful to not be blinded by your arrogance or anger. You must focus the rage in your soul and refine it into patient and insidious hatred. A cleric of the Sentries of Passion, Ulia Yovar, has been attempting to uncover our allies among the citizens of Freeport and is believed to be in hiding in the sewer tunnels under the western quarter of Freeport. Seek this enemy of the Dismal Rage and bring me her head.'

Final quest reward unknown at this time. There have been reports that Ulia may not be dropping her head when killed.

Created: 2003-06-25 09:18:48          
Last Modified By: Niami Denmother          
Last Modified on: 2003-06-25 09:18:48          


© 2003-22 Niami Denmother.
The fine print. This is a research and information site. All of the information on this site has been gathered and submitted by the players and Niami Denmother. While we try our best to keep the information here as accurate and up to date as possible, rely upon it at your own risk. By submitting information and graphics to this site, you are granting us permission to use the materials in any way that we deem appropriate. EverQuest is a registered trademark of Darkpaw Games LLC. Except as is disclosed on the "about" page, this site has no official connection with EverQuest or Darkpaw Games LLC. All information, articles and graphics on this site are the copyright of EQ Traders Corner, its owners and/or Darkpaw Games LLC and may not be copied or reprinted without the express written approval of the copyright holder. This site is not meant to represent official EverQuest (Darkpaw Games) policy, and we are not responsible for errors and/or omissions that occur due to changes in EverQuest trade skills or information that we received from the community that is in error.